Daily Driver F150 Build

Welcome to DezertRangers
Join the community. Register today for all the benefits of membership.
Register
Nov 25, 2012
114
16
18
Phoenix, AZ
#1
I purchased a white 2010 Crew Cab F150 back in 2014 and installed a leveling kit and my Method Race Wheels. I realized that one day I would build my truck up but since I was a student, it was not financially feasible then. After the stock tires wore out, I upgraded to some 285/70/17 cooper all terrains. I also did a few other subtle modifications, tint, speakers, electric cutout exhaust, led bar in the bumper, tonneau cover, bed mounted spare with 3 ton aluminum floor jack. Fast forward to January 2017, I drove to California to pick up my Fiberwerx front fenders and rear bedsides and then installed them in early February. Once taxes came back I bought Raptor upper control arms, lower control arms, and tie rods from Walter at Aftermarket HQ and then I bought Raptor coilovers from Valley Spring Service here in AZ with less than 200 original miles on them. I did the front suspension swap on March 19th with the help of a friend. And then on my way home after the swap, I got a gash in the sidewall of one of my tires. So the next day, March 20th, I bought 35" BF Goodrich all terrains. This is how my truck currently sits. My current plan is to upgrade my rear shocks, probably with some Raptor takeoffs., and just put some miles on the truck, on road and off road. This summer I plan on going camping and kayaking a lot up north to get out of the AZ heat. I will post some pictures from my phone during my lunch break.
 
Nov 25, 2012
114
16
18
Phoenix, AZ
#2
Does anybody have any ideas as to why I cant upload pictures into my managed attachments? I keep getting an error about format. I've tried two different computers and my iPhone - Thanks
 

ovrebo1

Asshole/ helpful
Dec 10, 2007
5,970
7
38
Colorado
#3
Does anybody have any ideas as to why I cant upload pictures into my managed attachments? I keep getting an error about format. I've tried two different computers and my iPhone - Thanks
DR is borked. You have to use a site that allows you to upload pictures and then provides you an embedded link. I use photobucket
 
Nov 25, 2012
114
16
18
Phoenix, AZ
#7
Helped my buddy install his Fiberwerx fenders that I picked up as the same time as mine. We got to use the shop at his work, and there were some pretty cool planes as well as a 6-7 million dollar helicopter.
 
Nov 25, 2012
114
16
18
Phoenix, AZ
#8
Since it was my birthday and my taxes came in around the same time, I pulled the trigger on all of the suspension parts I needed to do the Raptor front suspension swap
new 35" bf Goodrich all terrains since I got a gash in the sidewall of one of my tires
 

Latest posts

Today's birthdays

New Threads

New Classifieds

latest desert trips

Member Builds