Jaw's Jawdropper Build

**EvanNumberSeven** · 04-18-2011, 11:43 PM

We are working on it right now. And yes, its been a slow process due to some crippling sales numbers. But all I need back is snout blocks and we will be actually showing a great deal of progress on the front end. We have the upright lasercutting back in our hands now. Ill show a pic.

**GREGASAURUS REX** · 04-19-2011, 08:55 AM

I use mythical equal length unicorn horns for my axles

**84prerunner** · 04-19-2011, 10:15 AM

Originally Posted by GREGASAURUS REX

I use mythical equal length unicorn horns for my axles

goes great with your virgin elephant foreskin seats i bet.

**EvanNumberSeven** · 04-19-2011, 05:48 PM

You wouldnt believe how soft that stuff is...

**BRYANDENNY71** · 04-19-2011, 06:01 PM

Everything looks great!!

But I do think your welds looka little cold. Crank it up a little & get those beads to not "bubble" so much.

Other than that......great work!!

I'm a fan.

**Live...Ride...** · 04-20-2011, 06:50 PM

Originally Posted by 84prerunner

goes great with your virgin elephant foreskin seats i bet.

im dying hahahah

**GREGASAURUS REX** · 04-27-2011, 07:26 AM

Originally Posted by 84prerunner

goes great with your virgin elephant foreskin seats i bet.

WOW you remembered? haha I totally forgot about those!!! lmfao

**EvanNumberSeven** · 05-12-2011, 12:35 PM

Originally Posted by BRYANDENNY71

Everything looks great!!

But I do think your welds looka little cold. Crank it up a little & get those beads to not "bubble" so much.

Other than that......great work!!

I'm a fan.

Good stuff. Glad it's impressing.

We have the trusses back and the upper mounts ready to rock n roll. Ill have this housing flanged and all welded up here very soon. and some good pictures

**EvanNumberSeven** · 06-24-2011, 10:59 AM

Got it together finally. New upper link out of bigger tubing and new brackets

**714 Redneck Ranger** · 06-24-2011, 05:27 PM

Nice work!

**97OCrangerProject** · 06-26-2011, 07:30 PM

Hell yeah evan it looks titties!

Sent from my DROIDX using Tapatalk

**EvanNumberSeven** · 07-08-2011, 03:15 PM

Yo yo yo

**desert_steve** · 07-09-2011, 12:56 AM

what snout(s) is it designed to use?

**EvanNumberSeven** · 07-09-2011, 01:49 AM

any Dana or 2.0, 2.25, 2.5 custom snouts

**Roccomonte** · 07-11-2011, 12:02 AM

shouldnt it be built for one set of hubs to keep the sai correct

**Roccomonte** · 07-11-2011, 12:04 AM

e.x. I know dana is offset a hell of alot more than a custom, and chevy/ford dana hubs are offset differently and toyota ifs vs solid axle hubs are like 3inches different offset

Also, bringing the bottom radius for the spindle out as far as the top limits the bump travel in my experiance we just left enough meat down there to stop uniball bt from tearing out

**only1mikey** · 07-11-2011, 12:07 AM

Evan is a smart guy, I'm sure he figured that.

Mike

**EvanNumberSeven** · 07-24-2011, 06:06 PM

Ass monkey delivers on tuesday...

We had these welded up last week and now have the lowers being lasercut. Once those are in, we will up date you guys with the two on the trucks together. The trackwidth is about 81" with the wheelbase pushed out around 2". We are most likely going to do milled aluminum arms on top once we get the lowers back and the upper mounts back on the frame.

**josh_friedrichs** · 07-24-2011, 06:10 PM

those look really good!!

**EvanNumberSeven** · 08-23-2011, 09:39 PM

Oh yeah? What do you thing of this optimum gnar?

**85tacoguy** · 08-24-2011, 05:00 PM

spindles look clean. Where did those snout backing plates come from and how much for a set? If you dont mind me asking...

**EvanNumberSeven** · 08-24-2011, 09:03 PM

We machine them. We haven't explored retailing them like what Blitz does. Only because not too many people ask. If someone needs custom blocks made, we can make them to preferred spec its no biggie. So if you know what you want you can email me a drawing of what you need or general description of it and we can price it out for you.

**GREGASAURUS REX** · 08-25-2011, 08:26 AM

Why'd you go from a tube upper to boxed?

**EvanNumberSeven** · 08-25-2011, 08:38 AM

Its not. Youre looking at a boxed F150 lowers, the Tacoma upright, and the Tacoma lowers as the uppers. But we are doing a billet Al arm with a steel clevis.

**EvanNumberSeven** · 12-29-2011, 12:20 PM

getting new hardware

**desert_steve** · 12-30-2011, 02:05 AM

Originally Posted by EvanNumberSeven

getting new hardware

NICE!!! whens the raffle for that!?

**TheTequilaWorms** · 12-30-2011, 07:34 AM

Evan, your work is looking really good man. very impressive stuff. keep up the great work dude!

**EvanNumberSeven** · 12-30-2011, 09:38 AM

Originally Posted by desert_steve

NICE!!! whens the raffle for that!?

Probably next Expo

Originally Posted by TheTequilaWorms

Evan, your work is looking really good man. very impressive stuff. keep up the great work dude!

Thank you much!

**GREGASAURUS REX** · 01-05-2012, 05:26 PM

Originally Posted by TheTequilaWorms

Evan, your work is looking really good man. very impressive stuff. keep up the great work dude!

What work?

All I see is a computer drawing...

**EvanNumberSeven** · 01-24-2012, 10:53 AM

**EvanNumberSeven** · 01-24-2012, 11:42 AM

He got our custom hubs front and rear. So I took this opportunity to do him up some new uprights as well.

**tacorunner87** · 01-24-2012, 02:20 PM

How thick is the plate on the first spindles? Tig welds look really good.

Sent using Tapatalk

**ray aguilar** · 01-24-2012, 02:40 PM

wow man the housing and the upright looks amazing, very impressive sir!!!

**GREGASAURUS REX** · 01-24-2012, 04:51 PM

Nice

**cllake** · 01-24-2012, 05:35 PM

Very nice

**EvanNumberSeven** · 01-25-2012, 12:27 AM

Thanks guys. The first and second set of spindles are both 3/16" plate.

Thread: Jaw's Jawdropper Build

LinkBack

Thread Tools

Thread Information

Users Browsing this Thread

Similar Threads

new build... 87 yota pick up. full build

new build....

build or buy?

EZ GO Build

f-150 build

Posting Permissions