Thread: project 94 toyota

I think they are 8's if I remember correctly. I aired down in glamis once but honestly never thought to even check the clearances. I got my wheels and kit from matt helton so I knew everything was good and id never heard of rubbing issues so I never thought once about it. I'm sorry buddy but those wheels are stayin, for all 6 tires and wheels I paid 600. 2 were brand new I paid 250 for both

I might drop by the shop today and ill see about checkin that out for ya.

Damn that's a score. That's the exact wheel tire combo I want.

But snap a pic of the clearance if you can

Going by tomorrow and ill get that for u

Getting her all pretty and prepped for BAP at the end of feb

Planning to race?

Thats the plan

WOW. by far the best looking garage built toyota.

That means a lot to hear that. Thank you very much.

Prep and readying the truck for bap is moving so damn slow but hope to pick it up soon.
Got the driverside link bushing end wrapped and link painted. Now to cut the other side off and wrap it and repair the frame mount.

Don't think any of this is going to move

Nice! That looks solid.

Repairing and beefing the fuck out of the lower link mounts


Took out a bit of the sound deadening thanks to ray

Weld washers on everything

fuck that hammer!! haha got my hand a couple of times

Me too when I first was chipping it

This truck is gay and mike is black!!! Hahahahah

Sent from my DROID X2 using Tapatalk

Good hangin with ya lastnight jason.

Thanks to my pops we've got all new hardware for the rear suspension.
Got my steering quickener....yes that's a dalmation comforter

Ray mounted the secondary door latches.


Thanks Ray and Ed for all your help!

Your too man, pm me your email for those pics, I'll send em out this week

Sent from my DROID X2 using Tapatalk

dude! i used to have those same sheets! twinsies! hahaha truck is coming along! i wanna try and make it out to the race

thanks dude, ive been spending a lot of time on it. come out to the race, im sure we got a floor for you to sleep on

i gotta see what i got going on first. i was kinda thinking of going to the swapmeet though.

Just let me know and we can go from there

right on man will do. keep workin on the truck haha

Got a few things done today and picked up some goodies.
Gussets on the lower link mounts




Craig cleaned a bunch of tubes in the cab to prep for painting and my pops mounted the steering quickener. Its not fully done yet but isn't far off. Didn't get a pic of that.

rad man!

BAP or Bust!

truck is going to be tits when finished! have you checked the bushing on the lower arms yet?

No and I don't think I'm going to

You better be racing i already got my room at buffalo bills

Good man! Glad you will be there. Were gona tear it up as much as we can and as much as the 3.0 will allow us

the wheels are 15x8's with standard off the shelf backspacing from ARE.

trucks looking really good keep up the good work were did u get those triangle reflectors at ang goo luck at BAP

Sweet! Looking good! Take some pics when you are all done of it all clean and pretty and post them! Glad someone will be reppin the highly asteemed 3.0! Take a stopwatch and let me know how long you can hold it wide open without it blowing I'll be rooting for ya! (BTW I'm not making fun of you I have one too )

Originally Posted by fleshwound

Good man! Glad you will be there. Were gona tear it up as much as we can and as much as the 3.0 will allow us

hopefully it doesnt pop, he is putting a shit load of time in to it and that would suck haha

Originally Posted by Diamond Dave

Sweet! Looking good! Take some pics when you are all done of it all clean and pretty and post them! Glad someone will be reppin the highly asteemed 3.0! Take a stopwatch and let me know how long you can hold it wide open without it blowing I'll be rooting for ya! (BTW I'm not making fun of you I have one too )

We joked about that tonight actually. I'm very curious if this will be its last leg. I've got a 3.4 that might go in if it does pop. Everyone is trying to get me to go v8 but I don't know if I wanna open that can of worms cuz I gotta get diff coils and all sorts of shit if I do.
Ill be posting pics when its all done for sure.

Originally Posted by 22r stroker

trucks looking really good keep up the good work were did u get those triangle reflectors at ang goo luck at BAP

I got mine at mckenzies, 9 bucks a piece

Steering quickener is all mounted up and the steering column as well, just need another tube and finish welding and it will be fully done

Originally Posted by fleshwound

We joked about that tonight actually. I'm very curious if this will be its last leg. I've got a 3.4 that might go in if it does pop. Everyone is trying to get me to go v8 but I don't know if I wanna open that can of worms cuz I gotta get diff coils and all sorts of shit if I do.
Ill be posting pics when its all done for sure.

3.4 all the way!

How much do injectors go for? Any idea?

Yeah buddy! Did it all go together pretty smooth?

Ya that tube was there already and made it work out perfect. My pops did all the work, it went together surprisingly well

hows the steering going? like full left to right , whats the gain from stock to now? Or have you not gotten to try it out yet?