Thread: All Out f1 supercrew build

well its been sometime now since i started so some pics may be reposts but here they are anyways.

Looks like some good progress. You guys build the front end set up all in house? What is track width proposed to be? Keep up the good work. Cant wait to see the final product!!!

thanks,um its just me building out of my garage.i bought the hnm arms and spindles and trailing arms and thats all.

You do some incredible work. Couple questions. In one picture, you have a link under the cab, up against a tube. Is that about where it is going to go? Will the shocks be completely in the cab? How close will the tires be to the back of the cab? Just looks pretty tight is all. And wtf is that death trap looking golf cart? haha

more pics maan!?
the golf is the drunkin rally machine!

lol ya golf cart is like a 4 year project in the making cause i work on it like an hour every couple months cause i would rather work on the truck.but ya that is where trailong arms will mount, back of cab will be cut for shocks to fit all the way in the rear of the cab.

heres the death trap cart 580 cc artic cat efi

Hey man call me stupid, but are you just gonna be pushing the motor back a lot? Do you think it will be tight for a 4 seater still?

Either way, bad ass work like always!

Yea, I forgot to mention that too. This is going to be a 3 seater, right? I mean, big ass shocks right there in the cab, no way for 2 seats to fit back there, right? Not that there is anything wrong with that, of course.

What will the wheel base be?

What's up guys well I plan on two seats in the back. Stewartsraceworks built that silver one for mcmillans and it's setup that way, and yes motor will be about halfway under windshield, if not just a tad bit more forward.

sorry wheelbase about 138". And 90" wide

Your keeping the stock wheel base on it?

should it be shorter?longer?any input or suggestions are fine by me.

heres stewartsraceworks 138" and rear shockmounts in cab

Are your trailing arms hnm as well? That might be what you meant but I was just making sure.

ya hnm

lookin good mat i cant wait to swing by and check it out1

the Stewart Raceworks looks good. You can tell it has a stock or almost stock wheelbase.

ALLOUT - I think you get the questions about the wheelbase cause in some full size build people will shorten the wheelbase up some. If I remember correctly like in the 125" range. I might be wrong though.

Anyways, keep up the good work. Bad ass for a 1 man shop out of the garage!!!

Damn Matt its coming along nicely i may have to swing by and check her out soon.

thanks guys ya i think i will keep it around 138" dont wanna go to short with it,and ya anybody that wants to cruise by come on over.

Looks like a good build, should work well once you are all done.

Just to answer some people about wheelbase, on my F150 it is 9" shorter.

-Alex

ya my old f1 was extended cab shortened to about 135ish,but if i were to shorten this anymore its gonna look like an expedition lol. i think a stock extended cab is about 146"ish could be wrong though

Originally Posted by DezertF150

Just to answer some people about wheelbase, on my F150 it is 9" shorter.

-Alex

What was final wheelbase?

138-9=129 no?

Originally Posted by matt_helton

138-9=129 no?

didnt know if he meant off stock wheelbase or ALLOUT's number but thanks for the math lesson Matt

hey no worries there chief!

viva dillination!!

Damn wish i had the talent to do a project like this!! What you gonna run motor wise?

chevy 427,should have new pics in a few hours.

Originally Posted by alloutmotorsports

ya my old f1 was extended cab shortened to about 135ish,but if i were to shorten this anymore its gonna look like an expedition lol. i think a stock extended cab is about 146"ish could be wrong though

pretty sure the stock supercrew is 138. I would do 9 or so again if you can. 129-130 and 90 wide sounds damn good.

well got a few things done,floor started

chevy motor?!?! it went from being ok to being a total fail in 2 seconds...

is it gonna be a 427, or an LS7 either way. good choice

fail! lmao i think not, its an old big block 427

Nice door speakers!!

hey matt still got the 50 i traded you

Is street legality gonna be a consideration?

i dont think so

Originally Posted by alloutmotorsports

fail! lmao i think not, its an old big block 427

Heathen!

Originally Posted by alloutmotorsports

fail! lmao i think not, its an old big block 427

good choice on the 427 Matt

ha ya door speakers are ghetto i did not do that the guy i bought it from did and they will not stay,kyle ya i got it only ridden 50 like 2 times lol, and yes will be street legal.......somehow.

Originally Posted by alloutmotorsports

and yes will be street legal.......somehow.

Research Special Builds in your area, If you tell DMV that you are building a buggy with a newer Ford cab they may tell you what you can and can't do.

-Alex