Any idea on the front track width?
1996 Ford Ranger- Built & Sponsored by Kel Fab Creations
LINK TO BUILD
So nice!
Did it...
1996 Ford Ranger- Built & Sponsored by Kel Fab Creations
LINK TO BUILD
Out of curiosity, are those toyos 35/12.5/15s? I skimmed through the thread to find the size, maybe I just missed it? I'm going to get a set of these, but had only seen the a/ts in smaller sizes until now... Truck looks great btw! I'm a little jealous of your rear setup, keep up posted on how you like the 64s!
- Eddie
The last picture posted, shows Stainless fuel line, battery cables? And another couple wires all ziptied together....
Id highly recommend mounting the fuel lines and battery cable by themselves with adel clamps.... to the frame.... the stainless fuel line is very good and cutting thru battery cables....
Just a thought
Ya, I thought about that when I was mounting them...I was just really running out of room for everything with brake lines, 3 fuel lines, and battery cable. Theres just not much room, and it complicates everything else on the inside of the frame. You think if I just wrapped the battery cable with some kind of braided sleeving, it'd be alright, or you really think I should just relocate it all together?
I was also kinda rushing things a little, so I could get it running...But I do plan on going back and changing that around.
Last edited by Longtravel05; 04-01-2010 at 09:37 PM.
1996 Ford Ranger- Built & Sponsored by Kel Fab Creations
LINK TO BUILD
Honestly the furthest you get them apart from each other (electrical/fuel) the better... just zip tie the fuel line to the bottom of the inside of the rail... electrical to the top... just an idea
1996 Ford Ranger- Built & Sponsored by Kel Fab Creations
LINK TO BUILD
Havent had much time to do anything to the truck lately...But I did manage to wash it finally, after not being washed for almost a year and a half.
Oh, and I finally got a newDD / Tow Truck to complete my mini fleet. Three deep (Third back is now for sale).
![]()
Last edited by Longtravel05; 06-04-2010 at 11:03 AM.
1996 Ford Ranger- Built & Sponsored by Kel Fab Creations
LINK TO BUILD
It's all so nice!!!!!
Did it...
1996 Ford Ranger- Built & Sponsored by Kel Fab Creations
LINK TO BUILD
You have to color match the cab to the glass, and then get the beadlock/simulock rings powdercoated red. It would deffinitly set the truck off and match the interior.
VERY clean truck btw..
"Better to stand there quietly and have people question if you're a fool, then to open your mouth and remove all doubt."
"Imagination is more important then knowledge." Knowledge is limited to what we already know and understand, Imagination is limitless."
You may have answered this already but why do you have so many pickups in your fuel cell.
1416 GOOD KNIGHT RACING / Off Road Warehouse call and ask for dez mention DR for your discount 951_326_2880 CAMBURG / PHILLIPS STEEL/ORW/Pure hobby racing
1996 Ford Ranger- Built & Sponsored by Kel Fab Creations
LINK TO BUILD
theres only 2 pickups. Its got 2 pickups, 1 vent, and 1 return. This way I have two seperate supply lines...so if i get a clogged filter, defective fuel pump, clogged pickup or anything like that, I can switch to the auxilary supply line and have everything seperate.
1996 Ford Ranger- Built & Sponsored by Kel Fab Creations
LINK TO BUILD
the truck is looking good I thought I was unique on the cage gussets
but you have them also
and you got it running and rolling way ahead of me![]()
Thanks FiberwerX Lucas Oil & Bink Designs, ANZO lighting products
and Clinton Pierce (Fabricator)
Link to our 1450 build
http://www.dezertrangers.com/vb/dr-rides/108105.htm
Update?
Did it...
Last edited by Longtravel05; 06-04-2010 at 08:12 AM.
1996 Ford Ranger- Built & Sponsored by Kel Fab Creations
LINK TO BUILD
Finally got my truck all painted. Decided to just stick with the rootbeer color. Oh and tinted the windows. What do yo guys think?
![]()
1996 Ford Ranger- Built & Sponsored by Kel Fab Creations
LINK TO BUILD
....
Last edited by DAVE C; 06-04-2010 at 11:07 AM. Reason: im retarded
woooooo, you got new shoes too! wait you cut your cage off!?!?! wtf man, someone stole your fuel cell!! haha that pauls truck but your truck is going to look even more badass when you paint it.
1996 Ford Ranger- Built & Sponsored by Kel Fab Creations
LINK TO BUILD
Last edited by Longtravel05; 06-04-2010 at 11:09 AM.
1996 Ford Ranger- Built & Sponsored by Kel Fab Creations
LINK TO BUILD
yea f that stuff light weight ftw!!
truck looks badass.....
dang ninja edit! that was awesome, Keep up the good work. Kel is your brother right?
MORE 1419 Snore 1499 Taco with a side of Beams!
Trinity Motorsports
PolyPerformance.com
Powered by Jesus!
Cheap aint good and good aint Cheap!
Ya, thats my brother. Not much happening to the truck right now as I just bought a new truck and trailer. So I got lay low for a little while and save up some more money...Soon enough I'm gonna get a 9" Full Floater and have kel finish everything up including front bumper, custom center console, mounting lowrance gps, mounting floor jack, and more plating from cab to cage on inside. Then the plan is to get the inside sprayed with bedliner, then off to my new sponsor's shop for paint. Just gonna stick with the stock red color and I think Kel wants his logo on each door...We'll see...Hopefully it will be coming together soon.
1996 Ford Ranger- Built & Sponsored by Kel Fab Creations
LINK TO BUILD
Yeah paint it back to all red, will look great man. Btw do you have 2 different taillights on your truck? or did you change them to the 01-05 look?
1996 Ford Ranger- Built & Sponsored by Kel Fab Creations
LINK TO BUILD
nice, quick change back to leafs huh. Just messin
in that last pic you posted arnt those taillights 01-05? (reverse on top then all read)
There are currently 1 users browsing this thread. (0 members and 1 guests)