Thread: 93 4x4 Explorer

well never updated it with the new conversion front end. Also, Kevin over at Good Knight Racing built me a badass bumper outta 2 inch DOM. Hit him up for fabwork if you need something done! Loved the way it turned out.
[/IMG]
also mounted up my rear glass!
[/IMG]

More Updates coming next week!

i'm not too crazy about that tube going up over the lights, or the mini skid plate things, but if youre stoked on it thats all that matters. hows your light bar attach?

everything looks good man!! congrats. i like the older bodystyle front end better tho...but it looks good

looks good!

Looks awesome

thanks guys! Mac dont be jealous of it! At first i wanted just a single tube, but its 4x4 and it needs to be beefier. If need be, i can always get a new one made if i grow out of it. Also, its two piece of angle iron welded to the cab on 90* square pieces. Then the light rack bolts to the horns

Originally Posted by jeepspeed

thanks guys! Mac dont be jealous of it! At first i wanted just a single tube, but its 4x4 and it needs to be beefier. If need be, i can always get a new one made if i grow out of it. Also, its two piece of angle iron welded to the cab on 90* square pieces. Then the light rack bolts to the horns

jealous? of an explorer? on beams? bahahaha!

looks awesome man! get some damn action pics hucking it! haha

ha ill try my best and get some. Finally getting my coilovers on this weekend so we will see what happens now!

Mac, sarcasm is the evil sister of jealousy.

Originally Posted by doyouquaxu

jealous? of an explorer? on beams? bahahaha!

Originally Posted by jeepspeed

Mac, sarcasm is the evil sister of jealousy.

thats a good line, i need to write that down somewhere for later use.

ahah. well i finally dusted of my coilovers that have been sittin around and dropped them off at kevins again. Also picked a chrome grill up cause i think it looks much cleaner. Pics hopefully tomorrow or sunday of what is done!!!!!!

Looks good! I like the original front clip better but thats just me hah

Looks good, I dig the bumper dude!

Some real upgrades!
Chrome grille which i think looks way better than the white one.

Engine Cage outta 2 inch dom with plate behind the coilover for extra strenght, mounted to it are 12 inch coilovers
view from behind the wheel.

view from front of wheel

And cant forget my new favorite pic, this isnt at full droop either

fuck yea! looks awesome! i agree with the grill, chrome looks alot better.

everything is coming out real nice. Bump and strap that things and let me know when you wanna go testing, Ill head out with you.

Here are some pictures of the engine cage to add.

We went with a little bit diffrent setup and did complete plate for the center support of the engine cage.

Logan just has to due more clearance for the ft axles they were hitting the opening on full drop out.
Then next weekend going to do the engine cross member.

Does the 4x work? I like the design, looks clean

ya i agree, i like the design with the shock mounts. havent every really seen them like that on a beam truck. looks good though.

Thanks KEVIN!
thats exactly what kevin had said about it not being seen on a beam truck before. I love it! Gonna clearance the axle hopefully this weekend. Hey kev, did you happen to know what the travel numbers were?

Lookin good man. Another thing to check out if I have time to creep over there. I think you were in my store the other day but I was totally zoned out and didnt say anything LOL.

Time to take out your abs then tell me how to do it lol.

Originally Posted by jeepspeed

Thanks KEVIN!
thats exactly what kevin had said about it not being seen on a beam truck before. I love it! Gonna clearance the axle hopefully this weekend. Hey kev, did you happen to know what the travel numbers were?

Never actually measured it I would say it is around 18'' I just set it up for max droop and compresion with the shock you had.

you were stockin the soup and the guy next to you didnt seem very friendly, so i let you and him have your fun

Originally Posted by TMorf

Lookin good man. Another thing to check out if I have time to creep over there. I think you were in my store the other day but I was totally zoned out and didnt say anything LOL.

hah im gonna knock it out today most likely.

Originally Posted by doyouquaxu

Time to take out your abs then tell me how to do it lol.

have you mounted your rear door handles?
if so how was it, i need to do mine?
truck look good btw

yes, me and wtwcowboy on here did it. I had never done it before so he did it and i watched. It was pretty easy. Didnt take long at all

cool do they just bolt in or do you kinda have to tinker with them

How did you do your axle shafts? it looks good.