project falkor

**02XLTRANGER** · 09-15-2009, 03:56 PM

might take some time till im done with falkor but it wont hurt to start a thread on it...

when i had a spindle lift and 33s

painted the rims and HIDs.got new shox, limit sraps, and lower shock mount installed

deavers and 4 banger lift coils

**02XLTRANGER** · 09-15-2009, 04:32 PM

how it sits now. trans temp gauge, 4" glassworks fenders, pulled/ cut bedsides, drop down hangers, BFG 35s , front bumper with some help from BTF (thanx brandon), hella horns ,and some rear shox that im goen to get some bypass tubes add on and a rear cage some day lol

**roostthemoon** · 09-15-2009, 04:36 PM

Nice lookin rig mang

Have fun spending every penny you make hahah

**tylerpier137** · 09-15-2009, 04:38 PM

Nice setup, Almost exactly what I wanna do with mine.

Were did you get that trans gauge mount?

**02XLTRANGER** · 09-15-2009, 04:40 PM

Originally Posted by roostthemoon

Nice lookin rig mang

Have fun spending every penny you make hahah

shit tell me about it lol
the expo is prittymuch just how it came out of the shop

**02XLTRANGER** · 09-15-2009, 04:41 PM

Originally Posted by tylerpier137

Nice setup, Almost exactly what I wanna do with mine.

Were did you get that trans gauge mount?

autometer

**roostthemoon** · 09-15-2009, 04:42 PM

Dude that expo is super clean!!!!

**josh_friedrichs** · 09-15-2009, 04:43 PM

i want to have sex with your explorer

**jeepspeed** · 09-15-2009, 10:33 PM

i will have sex with that explorer

**b1z** · 09-15-2009, 10:37 PM

i wish i had sex with that explorer and got it prego and had another one just like it!

**02XLTRANGER** · 09-15-2009, 10:49 PM

you guys are funny in tryen to get my ranger to fuck it and have kids lol if you got a big D you can fuck it, it has a 3" tail pipe lol

**JakeP** · 09-16-2009, 07:38 AM

13" with a spindle lift, 33's and stock inner fenders? Pictures or it didn't happen! Rub the fenderwells A little?

**02XLTRANGER** · 09-16-2009, 10:47 AM

Originally Posted by jpjeep

13" with a spindle lift, 33's and stock inner fenders? Pictures or it didn't happen! Rub the fenderwells A little?

the inner fender have been moved up i have coils ls in there too

**JakeP** · 09-16-2009, 11:18 AM

How did you measure the travel? Or did someone else?

**02XLTRANGER** · 09-16-2009, 11:27 AM

from full droop with the tire on to the core suport where the tire rubed the hell out of it i know thats not how you do it but it was just a ballpark measurement i did plat the bottom of the bump pad becuz it started to rub the core from the bump pad smashing in so it my be different now

**Travisfab** · 09-16-2009, 12:19 PM

Sell the Ranger, finish the Explorer!

**02XLTRANGER** · 10-19-2009, 07:46 AM

picked up two 9" rear ends the other day going to take them apart and and build them back up

**02XLTRANGER** · 11-18-2009, 08:58 PM

well guess ill put some new stuff up... geting a LT kit from BTF boxed uppers,lower custom uprights, steering got some parts from BMS going to run the 2.5" hub kit on it dont have many pics but this for now

**02XLTRANGER** · 03-06-2010, 05:28 PM

not much but im bord so ill though these up

mock up 37" BFG project

BMS 7200 snouts

black ford logos lol..

**jeepspeed** · 03-06-2010, 06:15 PM

so hows the lt kit coming? 37s jeeze.
where did you get those black logos?

**02XLTRANGER** · 03-06-2010, 06:32 PM

just been waiting on the lazer cuter. yea 37s lol... ill pm you the web site

**02XLTRANGER** · 03-19-2010, 05:11 PM

went by the shop today and this was waiting for me

waiting for uppers

dang 1 1/2" uni-balls are big!

**carlover** · 03-19-2010, 05:16 PM

Nice dude, i wonder what it will cycle. And yeah 1.5" uniballs are massive.

**02XLTRANGER** · 03-19-2010, 05:25 PM

Originally Posted by carlover

Nice dude, i wonder what it will cycle. And yeah 1.5" uniballs are massive.

yes they are massive! well probably not as much as your kit but im hoping close to that. when brandon told me what your getting i wanted to sell my XLT and get an edge lol

**carlover** · 03-19-2010, 05:27 PM

Originally Posted by 02XLTRANGER

yes they are massive! well probably not as much as your kit but im hoping close to that. when brandon told me what your getting i wanted to sell my XLT and get an edge lol

Yeah we were in shock that it actually got 20" and is only 81" wide. 16-17 will work bitchin with the shocks dialed in 100%.

And my 20" is with no inner fenders, no ac/heat, and gonna have to relocate the main cab harness plugs. Along with a good deal of frame notching/cutting.

**02XLTRANGER** · 03-19-2010, 05:40 PM

Originally Posted by carlover

Yeah we were in shock that it actually got 20" and is only 81" wide. 16-17 will work bitchin with the shocks dialed in 100%.

And my 20" is with no inner fenders, no ac/heat, and gonna have to relocate the main cab harness plugs. Along with a good deal of frame notching/cutting.

dam and only 81 im in shock now...

yea im doen the same thing no inner fenders, notch frame, tub the cab where the tire will hit and no ac/heat for now. then soon hotrod air system.

moving the cab harness sound fun lol..

**02XLTRANGER** · 05-01-2010, 11:35 PM

boxed uppers

**Blase** · 05-02-2010, 06:15 PM

Look sick

**doyouquaxu** · 05-02-2010, 08:06 PM

those boxed uppers look sweeeeeeeeeeeeeeeet.

**02XLTRANGER** · 05-11-2010, 11:58 PM

so though the kit on to get an idea of travel numbers and how it would look. kit gets a little over 16" metal to metal with no frame notching so should get a few more numbers to that when its all notched up

**slcpunk74** · 05-12-2010, 06:25 AM

Just some generic gnarness going on here. You have the trifecta of gnar, 37" projects, boxed upper, and a sick fabbed upright.

Nice work indeed sir.

**SOUTHBAYcanyon** · 05-12-2010, 08:20 AM

very sweet project...cant wait to see the 37's on lol

**GIMME SAND** · 05-17-2010, 12:28 PM

Sweet. Dont see to many rangers on 37's. And this is the first thng i thought of when i saw the title...

**02XLTRANGER** · 05-18-2010, 01:40 PM

Originally Posted by GIMME SAND

Sweet. Dont see to many rangers on 37's. And this is the first thng i thought of when i saw the title...

should be sweet lol. yea i just always wanted to run 37s on a ranger and thought why not if i doent work out so well i could always put 35s back on. hahaha yep that what the rangers named after but ive been told its a stormtrooper aswell and i really like that name

**redsilvy** · 05-18-2010, 01:41 PM

sell your lights haha

**02XLTRANGER** · 06-20-2010, 08:44 PM

im bord so here is some things i picked up some time ago i got some custom rear BMS caps to match the 7200 hub boddy and also BMS steering clevis, just waiting on the studs for my front hubs. also pick up some of parrys bedsides.

**02XLTRANGER** · 07-25-2010, 06:57 PM

some updates....... going in the shop friday to get the front installed and did some things this weekend too.

**balls to the wall** · 07-25-2010, 10:14 PM

Keeping the tailgate?

**02XLTRANGER** · 07-28-2010, 08:13 PM

yea going to keep the tail gate for now mite take it off when i get the bedcage done or when the 37s go on dont really know yet lol...

**-MIKE-** · 07-29-2010, 08:42 PM

(random) but i saw you recently at Victoria Gardens, i was gonna say whats up, but you were with your girl. Truck looks really clean!

Thread: project falkor

LinkBack

Thread Tools

project falkor

Thread Information

Users Browsing this Thread

Similar Threads

BFG Project TA's

Project ROR

Posting Permissions