Crappy fab work

**Gudracing** · 02-08-2007, 11:30 AM

Saw this one on eBay. Always fun to search "Monster Truck"!

**sirhk100** · 02-08-2007, 12:27 PM

Originally Posted by [b

Quote[/b] (951yota @ Feb. 02 2007,6:24)]this is more scary than crappy.

You know when you balance on an aluminum cans and all you have to do is just slightly dent it to collapse it???

I wonder if the pissed off neighbor across the street can throw a rock from across the street and drop the truck, I mean, that's basically just two big aluminum cans holding up that thing???

**The Piece** · 02-08-2007, 12:32 PM

I'd take a shotgun with some 00buck to one of those kegs and have some fun! lol WAJ!

**oorracing** · 02-08-2007, 12:34 PM

Originally Posted by [b

Quote[/b] (Gudracing @ Feb. 08 2007,11:30)]Saw this one on eBay. Always fun to search "Monster Truck"!

That is one SiiiCK Gnar-dead tubed- shackle/block lifted-drop down- "MONSTER TRUCK!!!" haha. It even has dual exaust!!! I too search for random crap on ebay.. The best I have seen was a "4x4 bronco" with holes big enough to stand in throuight the floor.. It also said "needs minor body work".. I never knew replacing the whole floor pan and fenders was "minor" body work..

**Gudracing** · 02-08-2007, 01:37 PM

It was even 2wd. Not just a lack of drive shaft either.

**jsb_fabs** · 02-08-2007, 10:09 PM

HEY "REPRESENT".... WHERE'D U TAKE THAT PICTURE OF THOSE 2 GIRLS UNDER THAT BIG TRUCK WITH NO FRONT BUMPER??

**partybarge_pilot** · 02-08-2007, 11:41 PM

Since were on the topic of big dumb trucks......

Saw this today going about 60 in the fast lane...... Jackass!

When I went by he saw the camera and waved, Little did he know I was laughing at him. I gave him the thumbs up just for fun...... Your so cool!!!!!

**matt_helton** · 02-08-2007, 11:44 PM

dual trailer hitches!!!

**jeepspeed** · 02-09-2007, 09:05 PM

**DWR** · 02-09-2007, 10:29 PM

QUOTE]matt_helton Posted on Feb. 08 2007,11:44
--------------------------------------------------------------------------------
dual trailer hitches!![/[QUOTE]

that's the shit. you should see the trailer

**410fortune** · 02-09-2007, 10:58 PM

hahaha I saw that BII out in Truckhaven it was huge and pointless

**BLACKSTAR** · 02-09-2007, 11:08 PM

[QUOTE=[b]Quote[/b] (DWR @ Feb. 09 2007,10:29)]QUOTE]matt_helton Posted on Feb. 08 2007,11:44
--------------------------------------------------------------------------------
dual trailer hitches!![/

that's the shit. you should see the trailer *

lol

**Armistice** · 02-10-2007, 10:52 PM

Is that a cooler for a seat?! HAHAHA

**toekneekaos88** · 02-12-2007, 10:14 PM

Originally Posted by [b

Quote[/b] (jeepspeed @ Feb. 09 2007,9:05)][img]http://i83.photobucket.com/albums....mg]
[img]http://i83.photobucket.com/albums....mg]

jeez..........what a waste of a yota

**motoman93117** · 02-12-2007, 10:42 PM

Originally Posted by [b

Quote[/b] (jeepspeed @ Feb. 09 2007,9:05)][img]http://i83.photobucket.com/albums....mg]
[img]http://i83.photobucket.com/albums....mg]

fuck put osme srh and skin and socal stickers on that and we got a prerunner

**Chevy4Life** · 02-19-2007, 09:16 PM

??

**Chevy4Life** · 02-19-2007, 09:18 PM

**WanaBrunner** · 02-19-2007, 09:21 PM

those guys look really happy your taking a picture.My guess is the ubolts were loose or snapped? any background info? lucky they werent on the free way or out in the desert hauling ass.

**bajascott** · 02-19-2007, 09:40 PM

maybe they should've checked to see the bolts were tight................

had too sorry

**WanaBrunner** · 02-19-2007, 09:45 PM

wonder if anybody in the line of cars called on it

very bad advertisement that shit will never sell.

**HITMAN** · 02-19-2007, 10:30 PM

well atleast the truck has a sick prerunner lean to it!!!

**Josh1254** · 02-19-2007, 10:34 PM

hahaha

**TRPHYTRUCK** · 02-19-2007, 11:28 PM

That picture was takin a really long time ago. I belive max took that pic.

**jonerton15** · 02-19-2007, 11:57 PM

my buddy Cole actually bought that truck, then saw the pics haha

**esbyota** · 02-20-2007, 08:30 AM

I want to know how the rear end came out with the tires and the leafs still bolted up??

**fleshwound** · 02-20-2007, 09:12 AM

u bolts snapped with a spring over kit and the axle went right out the back. pretty simple. question is what happened with the shocks

**JBH Runner** · 02-20-2007, 09:29 AM

Shock bolted to mounting plates on top the spring pack?

**fleshwound** · 02-20-2007, 09:32 AM

i think your right, didnt think about that, since a lot more people are mounting off the axle to prevent axle wrap.

**sickdog** · 02-20-2007, 10:33 AM

If I remember right that happened on the way home from an ROR event and a shitload of people saw that...hahaha....kind of fucked up for those guys.

**sparkypyro** · 02-20-2007, 02:54 PM

That pic was great when originally posted and still great to this day.

**BLACKSTAR** · 02-20-2007, 08:28 PM

Originally Posted by [b

Quote[/b] (Chevy4Life @ Feb. 19 2007,9:16)]

??

and thats why its for sale

**Blownyota** · 02-23-2007, 11:52 AM

I saw this pic on a different post, but thought it was worthy of being placed in here.

**tweakedout1** · 02-23-2007, 04:29 PM

i dont get it... whats wrong with it??? lol

**esb4130** · 02-23-2007, 09:51 PM

i read this thread and just wonder how some people tie there shoes in the morning

**115KTM** · 02-23-2007, 11:12 PM

Originally Posted by [b

Quote[/b] (esb4130 @ Feb. 23 2007,9:51)]i read this thread and just wonder how some people tie there shoes in the morning *

slip-on's?

**battlescars** · 02-23-2007, 11:17 PM

Originally Posted by [b

Quote[/b] (115KTM @ Feb. 23 2007,9:12)]

Originally Posted by [b

Quote[/b] (esb4130 @ Feb. 23 2007,9:51)]i read this thread and just wonder how some people tie there shoes in the morning *

slip-on's?

velcro

**battlescars** · 02-23-2007, 11:18 PM

tying is for chumps

**metalkicker** · 02-25-2007, 01:22 AM

my 2nd HF notcher broke. apparently the threads that hold the holesaw on busted off from it catching too many times. quick fix to keep the work pumping out was to weld the holesaw to the notcher....what happens when the holesaw wears out?? screwed....

**sickdog** · 02-25-2007, 02:21 AM

Originally Posted by [b

Quote[/b] (metalkicker @ Feb. 25 2007,1:22)]my 2nd HF notcher broke. apparently the threads that hold the holesaw on busted off from it catching too many times. quick fix to keep the work pumping out was to weld the holesaw to the notcher....what happens when the holesaw wears out?? screwed....

LOL...thats something I would do.....good shit!

**mike1390** · 02-25-2007, 10:18 AM

Originally Posted by [b

Quote[/b] (hackjob @ June 11 2006,11:41)]i never said that i'm better than anyone. So zbtf you must have a thing for me cause you sure invest alot of your time replying to me. Nothing i've said is false just full of bs. The crtical comments i've made are valid. If you feel anything i've said invalid please inform me. My background, i'll tell you a story but you'll think it's just that, a story. I've owned my own shop for the past 10 years,been in the welding trades for 17yrs, specializing in machine shop services,aerospace, food grade stainless, structural steel, and certified jobshop welding,as well as specailized marine fabrications. I hold 15 different process weldling certificates(that are current now) smaw all positions unlimited thickness. gmaw unlimited,fcaw unlimited, gtaw unlimited all base *material groupings. As for equiptment ther aint much i don't own. Anything else i can provide for you?

so if you have all these certs and own your own shop, im sure you can be making some pretty good money either on a job site or through your own business, so why are you pimpin a honda, and clame to be too poor for a digital camara?

Thread: Crappy fab work

View First Unread

LinkBack

Thread Tools

Thread Information

Users Browsing this Thread

Similar Threads

Fab Work in the 949

Trade Fab work for Tattoo work

spotting crappy welds on the spot!

Posting Permissions