Crappy fab work

**Travisfab** · 11-12-2007 09:32 AM

Originally Posted by Brandon_Charley

MySpace

Link?

**Brandon_Charley** · 11-12-2007 10:18 AM

MySpace

The rest don't look that bad, just the width and shock setup look kinda crazy in the one I posted. Looks like his tires are probably completely outside his glass.

**-MIKE-** · 11-12-2007 11:07 AM

Originally Posted by Brandon_Charley

MySpace

The rest don't look that bad, just the width and shock setup look kinda crazy in the one I posted. Looks like his tires are probably completely outside his glass.

the rest doesn't look that bad? wasnt this truck a few pages back with terrible welds. and the guy came on here admitting how his truck was hacked together.

**-MIKE-** · 11-12-2007 11:10 AM

sorry i forgot to add.

**Brandon_Charley** · 11-12-2007 11:12 AM

I didn't really inspect the rest of the pictures, I was trying not to set myself up for the "Let's see your work" response. The one I posted was his avatar pic.

**Brandon_Charley** · 11-12-2007 11:15 AM

Ok, upon further inspection I agree.

**norunner** · 11-12-2007 12:13 PM

WTF is up with those welds?! Is the guy who built that blind? No offense if he is.

**Brandon_Charley** · 11-12-2007 12:16 PM

Isn't that what it looks like when you don't use gas? Or is it when your polarity is reversed?

**bigsheepballs** · 11-12-2007 12:53 PM

looks like hes sponsored by Harbor frieght, your welds look like that when you have no clue what your doing, i cant tell from the pictures to tell you what exactly is wrong could be many things

**norunner** · 11-12-2007 12:54 PM

It's hard to tell, but it looks like there is some porosity (sp?).

**Brandon_Charley** · 11-12-2007 12:59 PM

Looks like nothing but pourosity. I know I've seen something similar, can't remember if its, wrong gas, no gas, or wrong polarity. Either way that is why you have to have someone get you started when you want to weld as opposed to being totally self taught, his life was in danger.

**85yota** · 11-12-2007 01:57 PM

Originally Posted by Bryan_D

Ehhh take this to pms!

O that's funny Brian. The new 3rd is bitchin if that's what your askin.

**rangerbrandon** · 11-12-2007 02:02 PM

That guy is a memeber on this forum lol.

**bigsheepballs** · 11-12-2007 05:01 PM

he probably is using mig wire and no shielding gas he has the harbor frieght flux core welder.

**the willis** · 11-12-2007 06:23 PM

Originally Posted by Travisfab

Link?

did you read his myspace piture coments on this truck a kid said it was clean and he wanted to mob it....... poor kid

**PROJECTRUNNER87** · 11-12-2007 08:06 PM

ha ha thats me...i know i know...that happened before got into dezertrangers....sold it for 500 bucks guy was just going to use shocks and fiberglass ha...but def decided to do my research before trying to do anything again... prob go to school or something...dumb teenagers

**CRACKERJACK** · 11-13-2007 11:30 PM

is that a no bends truck

**bulldozer** · 11-13-2007 11:55 PM

Originally Posted by CRACKERJACK

is that a no bends truck

no bends... OR notches.

Siiiiicccck.

haha

**exyota** · 11-14-2007 11:47 AM

i almost traded this guy for my truck but i saw it better and was like holy fuck that shits fucked up. good thing i didnt buy it fer sure.

**Desertman103** · 11-14-2007 12:05 PM

Originally Posted by PROJECTRUNNER87

ha ha thats me...i know i know...that happened before got into dezertrangers....sold it for 500 bucks guy was just going to use shocks and fiberglass ha...but def decided to do my research before trying to do anything again... prob go to school or something...dumb teenagers

well atleast you saw the light haha

**allupinsydeyou** · 11-16-2007 04:25 PM

Originally Posted by Brandon_Charley

Looks like nothing but pourosity. I know I've seen something similar, can't remember if its, wrong gas, no gas, or wrong polarity. Either way that is why you have to have someone get you started when you want to weld as opposed to being totally self taught, his life was in danger.

looks like he did nothing but butt the metal together with no notches and filed in the spaces with wire... if your gunna afro engineer... at least hit that shit with a grinder. still bad jew jew

**Twisted Sid** · 11-20-2007 04:31 AM

http://www.yotatech.com/f116/sign-po...repair-130271/
this little jewel just showed up on a toyota forum i also visit

**NODNARB** · 11-20-2007 08:04 AM

Originally Posted by Twisted Sid

http://www.yotatech.com/f116/sign-po...repair-130271/
this little jewel just showed up on a toyota forum i also visit

http://www.pirate4x4.com/forum/showthread.php?t=632063

Jesus H. Christ...

**FasterNU** · 11-20-2007 08:32 AM

MEGA MEXI BLING:

not sure if it's "crappy fab" ... but still enjoyable to laugh at

**miguelitro** · 11-20-2007 12:59 PM

That thing is so rad. All it needs are some dimple dies and he would be in la chocha. i think everybody who has been to Ens. for a race has a pic of that thing.

**Brandon_Charley** · 11-20-2007 01:33 PM

Originally Posted by Twisted Sid

http://www.yotatech.com/f116/sign-po...repair-130271/
this little jewel just showed up on a toyota forum i also visit

Ok, so maybe it wouldn't be such a horriblr idea if the feds started regulating fab work.

**sparkypyro** · 11-20-2007 01:51 PM

Originally Posted by FasterNU

MEGA MEXI BLING:

not sure if it's "crappy fab" ... but still enjoyable to laugh at

Have seen this every race I've been too in Ensenada the last 3 years.

**danielson** · 11-20-2007 03:16 PM

i saw this on my way to a whiplash race in snow flake

**A-Beams** · 11-20-2007 04:11 PM

fuck yea....wood and boxed sign post is stronger fuck Chromoly.

**alloutmotorsports** · 11-20-2007 04:15 PM

holy fuck lmao! maybe he is sponsered by lowes?

Originally Posted by A-Beams

fuck yea....wood and boxed sign post is stronger fuck Chromoly.

**coopaaron0** · 11-20-2007 04:21 PM

Originally Posted by alloutmotorsports

holy fuck lmao! maybe he is sponsered by lowes?

It reminds me of an erector set..

**KartmanAZ** · 11-20-2007 04:37 PM

Traction bars.

All the pics
http://picasaweb.google.com/erikhuls...omTractionBars

**Repothis** · 11-20-2007 04:49 PM

Am I retarted or can I just not see the fuel cell?

www.sign-pros.com/prerunner/

**A-Beams** · 11-20-2007 04:59 PM

Originally Posted by Repothis

Am I retarted or can I just not see the fuel cell?

www.sign-pros.com/prerunner/

under the bed?

**bulldozer** · 11-20-2007 05:02 PM

Originally Posted by Repothis

Am I retarted or can I just not see the fuel cell?

www.sign-pros.com/prerunner/

I think it's there under the bed, painted black. Oh, and you can see the filler tub comign throught the bed which is a good clue.
That truck looks pretty nice IMO.

**Repothis** · 11-20-2007 05:02 PM

[QUOTE=KartmanAZ;795374]Traction bars.

All the pics

If you go to his profile...... he did it to a frontier too! Hell.

**Repothis** · 11-20-2007 05:03 PM

Originally Posted by bulldozer

I think it's there under the bed, painted black. Oh, and you can see the filler tub comign throught the bed which is a good clue.
That truck looks pretty nice IMO.

I wasn't knockin it just wondering, It looked crappy at first cause the headliner i thought it was like a half cage until i looked closer.

**blahblah** · 11-20-2007 05:27 PM

don't think that sighnpro ranger has a fuel cell, think its a bronco 2 tank..

**A.J.** · 11-20-2007 05:31 PM

Originally Posted by bulldozer

I think it's there under the bed, painted black. Oh, and you can see the filler tub comign throught the bed which is a good clue.
That truck looks pretty nice IMO.

Fromthese comments, its obvious you guys havent been around for long

it says in the Add it has a BII tank...... a BII is a Bronco 2, The tanks were squares, and fit perfectly in the back of a ranger frame rail, worked great, a Low Cost way of moving the Gas Tank to the rear.

and yeah that truck looks great... id say he couldnt easily get $6K

**bulldozer** · 11-20-2007 05:42 PM

Originally Posted by A.J.

Fromthese comments, its obvious you guys havent been around for long

it says in the Add it has a BII tank...... a BII is a Bronco 2, The tanks were squares, and fit perfectly in the back of a ranger frame rail, worked great, a Low Cost way of moving the Gas Tank to the rear.

and yeah that truck looks great... id say he couldnt easily get $6K

rofl

Okay Mr. All knowing ranger god, I know what a BII tank is. I didn't read the whole description on the page so I figured it had a fuel cell because that's what someone before me mentioned.
I don't see why you couldn't just point out that it said that instead of trying to insult people with condescending remarks.

Thread: Crappy fab work

LinkBack

Thread Tools

Sign Post Truck Frame Repair

Thread Information

Users Browsing this Thread

Similar Threads

Fab Work in the 949

Trade Fab work for Tattoo work

spotting crappy welds on the spot!

Posting Permissions