Crappy fab work

**Copykat** · 06-11-2008, 06:03 AM

Are thos painted Dots or stickers??

**partybarge_pilot** · 06-11-2008, 08:06 AM

Originally Posted by RangerRick89

lol.

Holy hockey sticks with bad shock geometry!

**partybarge_pilot** · 06-11-2008, 08:08 AM

Originally Posted by RangerRick89

lol.

Kleetus, go get the Ranger, I need to grade some berms in the field.

**desertrunner07** · 06-11-2008, 08:09 AM

im glad im not the only one who thought those beams looked off..

**bulldozer** · 06-11-2008, 08:12 AM

Originally Posted by partybarge_pilot

Holy hockey sticks with bad shock geometry!

Yea you like how the shocks are 90degrees to the beam at ride height? lol

**RangerRick89** · 06-11-2008, 08:58 AM

Originally Posted by partybarge_pilot

Kleetus, go get the Ranger, I need to grate some cheese in the field.

Fixed

**CVP PRERUNNERS** · 06-11-2008, 09:10 AM

Originally Posted by RangerRick89

lol.

the truck is a nice clean truck for sure,but the down falls,steering,beams bumper that only looks like it hangs from the two top tubes!!

**RangerRick89** · 06-11-2008, 09:39 AM

And the owner is most likely a total faggot

**miguelitro** · 06-11-2008, 10:00 AM

Originally Posted by RangerRick89

And the owner is most likely a total faggot

well, yeah he's from san diego LOL

**battlescars** · 06-11-2008, 10:04 AM

Don't bring all of San Diego into this, just Hillcrest.

**LVbLaCkRaNgEr** · 06-11-2008, 10:17 AM

holy beams batman

**rangerbrandon** · 06-11-2008, 10:19 AM

Parts Included:
Upper A-Arms W/ Bushings, Uniballs, & Clips
Lower A-Arms W/ Bushings, Shock Mounts
Tie-Rod Extensions
Tapered Spindle Sleeves
Braided Stainless Brake Lines D.O.T. Approved
Bolt-on Upper Shock Mounts - Specify Brand
Hardware
Adjustable Limit Straps & Mounts
Plated Upper A-Arm End Washers
Weld-on Bump Stop Spacers
Lower Uniball Conversion

Where does it say custom spindle?

**bajaflo99** · 06-11-2008, 10:28 AM

Originally Posted by partybarge_pilot

Holy hockey sticks with bad shock geometry!

Dimple die sticker kit?? Can you say CUSTOM!!

**NODNARB** · 06-11-2008, 10:30 AM

Originally Posted by bajaflo99

Dimple die sticker kit?? Can you say CUSTOM!!

i SHOULD MAKE SOME OF THOSE...LIKE THE BULLETHOLE STICKERS, lol

**F1sleepy** · 06-11-2008, 12:27 PM

Originally Posted by RangerRick89

lol.

=POOP!

James

**JebusTheGreat** · 06-11-2008, 12:37 PM

Originally Posted by F1sleepy

=POOP!

James

there are a few CRUCIAL tubes missing from that bumper.....

**87-RANGER** · 06-11-2008, 01:11 PM

You guys are so mean! Leave the guy alone for crying out loud! I see nothing wrong with his truck. You guys are so judgmental jeeeeez

**ghostranger77** · 06-11-2008, 01:36 PM

haha dave you are somethin else

**brodozer motorsports** · 06-11-2008, 02:37 PM

Originally Posted by miguelitro

well, yeah he's from san diego LOL

yeah woah hey i live in san diego come on now we are not that bad

**bulldozer** · 06-11-2008, 05:37 PM

Originally Posted by ghostranger77

haha dave you are somethin else

Nah dave's just like the rest of us.

Only gayer.

lol jk jk

**87-RANGER** · 06-11-2008, 05:40 PM

Originally Posted by bulldozer

Nah dave's just like the rest of us.

Only gayer.

lol jk jk

XXXXXX
0000000! lmao!

**bulldozer** · 06-11-2008, 06:06 PM

Originally Posted by 87-RANGER

XXXXXX
0000000! lmao!

LOL.

Hey dave what is that hanging from the corner of the bumper on the white ranger pic you posted?

Looks like a turd?

**RangerRick89** · 06-12-2008, 03:14 AM

Fuckin decorational bumper. true dgaf.

**Froaderanger94** · 06-12-2008, 09:16 PM

Originally Posted by battlescars

Don't bring all of San Diego into this, just Hillcrest.

haha yea dont go bashing san diego.

nice stock bent steering! as if stock steering doesnt bend easily enough already, thats shit's just gonna tweek like a coat hanger!

**icdred** · 06-12-2008, 09:41 PM

I swear you guys can fuck up a good thread in a matter of hours........now shut the fuck up and post "Crappy FAB" PICTURES!!!

Like this guy........thank you, this is pure entertainmnet.

Originally Posted by desertrunner07

im glad im not the only one who thought those beams looked off..

**CVP PRERUNNERS** · 06-12-2008, 10:42 PM

Originally Posted by icdred

I swear you guys can fuck up a good thread in a matter of hours........now shut the fuck up and post "Crappy FAB" PICTURES!!!

Like this guy........thank you, this is pure entertainmnet.

thats the sickest notch ive ever seen

**ghostranger77** · 06-12-2008, 10:43 PM

Originally Posted by CVP PRERUNNERS

thats the sickest notch ive ever seen

those are some tallll shock mounts must be some ranchos of a lift kit for a super duty

**SMnissan** · 06-13-2008, 02:20 AM

Not really fab work, but check out this 4 inch spacer lift with uniball upper arms, is it me or do those misalignment spacers look like they have barely any misalignment? Here's the link http://www.tundrasolutions.com/forum...t/#post1044220

**4x4x** · 06-13-2008, 02:48 AM

Yah the beams are pretty wierd and all, I think that's been covered in this thread and other...I just don't know why people rock those penis bumps...does that shit work at all I mean come on! I tried some urethane bumps and blew the fuck out of em in 10 miles of easy mobbin in Mojave...I understand that not everyone can afford hydro bumps but I dunno I'd rather wait till I could come up with some cash to throw some real bumps on there if I was doin the whole coilover thing. Not talkin shit, just throwin it out there.

Otherwise I think the truck looks pretty nice!

**silranger** · 06-13-2008, 03:11 PM

I used those bumps along with hydro bumps on my h&m kit you just need to cut the weener tip off of them so there more of a fat chode and it works great!!
I had to get rid of my hdro bump last year and the chodes alone laster all season. I will be getting new bumps thought because hyros are like a night and day difference offroad

**DiRt YoTa** · 06-13-2008, 03:22 PM

Trophy truck status bumper!!!

**BostonRegs** · 06-13-2008, 03:35 PM

rebar?! poor some concrete on there and run it!

**DiRt YoTa** · 06-13-2008, 03:52 PM

its like 1 inch solid round bar i think. here's some pics of the welds

**F1sleepy** · 06-13-2008, 04:06 PM

Originally Posted by 4x4x

Yah the beams are pretty wierd and all, I think that's been covered in this thread and other...I just don't know why people rock those penis bumps...does that shit work at all I mean come on! I tried some urethane bumps and blew the fuck out of em in 10 miles of easy mobbin in Mojave...I understand that not everyone can afford hydro bumps but I dunno I'd rather wait till I could come up with some cash to throw some real bumps on there if I was doin the whole coilover thing. Not talkin shit, just throwin it out there.

Otherwise I think the truck looks pretty nice!

If your shocks are dialed in right, there is no reason to blow through your bumps so fast. You shouldn't bottom out on every bump. The point of the bumpstop is to be the last line of defense between your suspension and the frame. Poly bumps work just fine if you aren't slamming them 30 times a minute.

James

**nmsilveradorunner** · 06-13-2008, 04:13 PM

Exactly and oh wait look a lil harder.. still has 4WD you can have a lift spindle and 4WD on a yota.

**maxyedor** · 06-13-2008, 04:31 PM

Originally Posted by NODNARB

i SHOULD MAKE SOME OF THOSE...LIKE THE BULLETHOLE STICKERS, lol

Seriously, if you made some dimple die stickers I would buy a few for my refridgerator, it's allready got some HIDs, may as well have dimples.

This made me laugh, then I found out the owner didn't do it as a joke, and it made me sad.

**beandiggity-o** · 06-13-2008, 06:40 PM

[quote=4x4x;1045276]

someone should invest in a bender

**KartmanAZ** · 06-13-2008, 07:29 PM

Originally Posted by Forrest

his bumper prettymuch.. he jocks it wayy too hard

Forest is a very appropriate name for you.

**DoksPK** · 06-13-2008, 07:38 PM

Maybe a repost, maybe your truck (sorry if it is), maybe not crappy fab worthy but never the less it will make you smile!!!

**WanaBrunner** · 06-13-2008, 07:46 PM

yet it still somehow looks like it has more paint than the bronco paul.. spider web gussets are new? never seen that. !!

Thread: Crappy fab work

View First Unread

LinkBack

Thread Tools

Thread Information

Users Browsing this Thread

Similar Threads

Fab Work in the 949

Trade Fab work for Tattoo work

spotting crappy welds on the spot!

Posting Permissions