Didn't see one here are a few pics I have of my 95 .
![]()
Didn't see one here are a few pics I have of my 95 .
![]()
Boats and Hoes.
"Buck Nasty"
that first one looks like gnarly little kicker haha
Ass, grass, or gas, no one rides for free
More than likely the most popular truck on this forum and no pictures. whats the deal??
i also have no pictures to add.
One of my fav. trucks out there! love the interior in it chris...
Boats and Hoes.
"Buck Nasty"
Grasshopper
DON’T JUDGE MY BELONGINGS TO YOURS
Project #3 ranger
DON’T JUDGE MY BELONGINGS TO YOURS
Nothing crazy this time bolt on parts either Giant or camburg depending what way I want to go?? Rear is going to be a Giant 64 spring pack for sure with a simple clean bed cage and maybe a BMS or camburg flanged axel..
DON’T JUDGE MY BELONGINGS TO YOURS
went over to the wilson shop last night and took some pics of there ranger prerunner they have it has a v8 with about 800hp 37s and you can drive it on the streets lol
![]()
eric: always liked the look of your old truck. ranger #3 should be a good build, i'm looking forward to it
scott: looks to me like it's inspiration for your truck.
it is Mac been talking to them about things....only thing is im staying with the v6 so i can race 7200
Anyone have some good pictures of engine cages on these trucks?
-Brad
*NOCTURNAL INDUSTRIES* Your local AZ fabricator, PM me if you need any fab done from bumpers to full race truck builds
Scott, have you seen that truck's green brother? Lots more pics, plenty of detail shots from bare frame all the way to roller. It's going to be equivalent to the Wilson's truck when it's done, full interior, built V8, etc., etc. Awesome to drool over in person. SI Motorsports, Inc. - Performance Pre-Runners, Long Travel Suspension and Custom Fabrication
- Eddie
Btw - What was their first impression about the IBP's on their pre-runner?
Last edited by yellowranger1; 02-14-2011 at 09:30 PM.
Eddie there are two S.I. Built rangers running around with 37"s that I know of. One the wilsons own and the other I am not sure who owns it. It was for sale on rdc awhile back. There is also a "DD " white version that was also for sale awhile back. Basically the same as the wilsons but with 35"s, no cage with stock interior and no v8. Super clean truck though. I Msg'd the guy when it was for sale and he sent me a bunch pics I'll post. They are on my other comp. Then there is the drywall guys ranger, and a few others. That green truck is going to be amazing once completed.
"Better to stand there quietly and have people question if you're a fool, then to open your mouth and remove all doubt."
"Imagination is more important then knowledge." Knowledge is limited to what we already know and understand, Imagination is limitless."
im 90 percent sure the wilsons isnt an si built one. they were saying it was built by a guy out of big bear and his neighboor and he got in an arguement and was killed by the neighboor.
It sure looms like S.I. Build style. Swingers look the same, the miter cut at the back if the cab is similar, and the whole simple look and stance of the truck. Who knows though.
"Better to stand there quietly and have people question if you're a fool, then to open your mouth and remove all doubt."
"Imagination is more important then knowledge." Knowledge is limited to what we already know and understand, Imagination is limitless."
The Wilson's truck is in fact the "drywl gy" truck. Built by Plank/SI. Kevin, the whiteDD truck you're talking about was built by Newline, like Gabe Lara's blue ranger, same build style/crafstmanship/attention to detail. Tom and Nestor have the same jigs from the Plank days, and build bolt on kits like that whiteDD ranger. Was the other SI truck you're talking about blue by any chance? I remember seeing it on RDC, and Camburg bought it to build a pre-runner out of. They were selling all the susp. off of it in the RDC classifieds. There's also the OTHER white truck that Kibbetech finished, which came out bitchin' as well.... They get hard to keep track of, lol.
Jeepspeed - I think the man you're referring to would be Nye Frank? The basic story sounds similar, but he did not build this truck.
- Eddie
It's all fun and games until someone gets wheel chaired to the hotel room.
97 Ranger w/ Threat MS front end, a work in progress....
NOR*CAL
[QUOTE=yellowranger1;2549696]Scott, have you seen that truck's green brother? Lots more pics, plenty of detail shots from bare frame all the way to roller. It's going to be equivalent to the Wilson's truck when it's done, full interior, built V8, etc., etc. Awesome to drool over in person. SI Motorsports, Inc. - Performance Pre-Runners, Long Travel Suspension and Custom Fabrication
- Eddie
The one SI has been building is my buddy Andrews truck its going to be really nice once its finished
DON’T JUDGE MY BELONGINGS TO YOURS
Yeah. Plank taught Newline/SI/a few others how to build stuff.. And you can tell. They all build things basically the same. Lucky bastards... Lol
I forgot about the 'Burgs new toy, but no that isn't the one I'm talking about. It was a tan cab with white fenders, Robbys rims, 37"s, etc. It was for sale probably 4+ years ago? I have a picture saved somewhere..
Either way I'd love to have a truck built by any of them. Since I can't afford that, I'm building my own half-a$$ed version![]()
"Better to stand there quietly and have people question if you're a fool, then to open your mouth and remove all doubt."
"Imagination is more important then knowledge." Knowledge is limited to what we already know and understand, Imagination is limitless."
I know which one you're talking about, I think it was for sale again not too long ago out here in the valley. And yours is coming along pretty damn good man! That's the difference between rushing and slapping it together and taking your time to make sure it comes out right, and the way you want it, and it shows in yours. I'll have to trade you rides when it's done, or next time we're both out in the dirt again.
there is the SI ranger that is over at BMS getting finished.
charlie brown goes to baja.
Quote from Ted Nugent: As long as the idiots don’t like you, it proves you are not an idiot.
my 4.0 sohc motor swap. http://www.dezertrangers.com/vb/dr-rides/119213.htm
Which one is that? Any pics of it? I know the "money pit" has been back there, that one had a newline front end on it, don't know if it still does though, and the rest is BMS built.
tea, that one
charlie brown goes to baja.
Quote from Ted Nugent: As long as the idiots don’t like you, it proves you are not an idiot.
my 4.0 sohc motor swap. http://www.dezertrangers.com/vb/dr-rides/119213.htm
Yea Ill try and dig some up it was a shitty design though, I wouldn't have built it that way. It broke off with some heavy nerfing from a toyota =( in oco. at 1 in the morning and couldn't find it, it had a brand new bfg on it too. Oh well doing duel stand ups instead to get some weight back there. The whole truck Should be getting some goodies here real soon.
Boats and Hoes.
"Buck Nasty"
One with the bbq, I dont think I have one with the tire off it.
One more cuz its clean.
![]()
Last edited by OceansideLocal; 02-28-2011 at 12:33 AM.
Boats and Hoes.
"Buck Nasty"
what size coilover are usually ran on these year rangers??
Thanks man the bbq is pretty trick and works good. I actually lost the spare, Looking to do stand ups and bypasses and maybe some new bedsides. Its been sitting for the last 8 months collecting dust and needs some love.
Im running 14's on my truck and its bumped and strapped at 19 worked really well for two seasons till my beam end decided to come apart.
Boats and Hoes.
"Buck Nasty"
ocean side local=what beams you have on ur truck?? do you have a build thread??
your truck is really clean wish i had it ha
and are 14s typical for beamed rangers??
what springs are ran on a singlecab??
sorry if there dum ??
Had a few offers on it and decided to keep it and just do small things and make it a cleanDD prerunner again with a cage. Im pissed about the glass too the grill is all fucked up now too thinking about doing some type of 1 piece.
Boats and Hoes.
"Buck Nasty"
There are currently 1 users browsing this thread. (0 members and 1 guests)