Thread: 01-10 Ford Explorer Sport Trac Pics

If the weird roof rack and the bedrail clip things were taken off, then ST's would look like mini crew cab F150s



any more pics?????????

Yes, I would like to know what other 4x4 suspension lifts there are for the Ranger Edge ifs models besides RCD and Dixon Bros.

Some day I should have the money to buy a lift for my Sport Trac.

Originally Posted by roly555

have you guys seen perry mcneils sport trac .. too bad he wrecked it pre running the baja 1000

any news on what happened?

There is a thread about the Mcneils wreck in Baja


Nice truck Johnstone! You have been beating the crap out of that thing since I can remember!! LOL

Brenthel (sp?) industries is now making a 4x4 IFS Edge/sploder LT kit also
BT fab is also saying he will build you a kit, when I get the $$$ it will be tough to decide
The torsion bar delete/coilover conversion using the RCD brackets is becoming popular, no drop brackets, coilovers and 2-3 of lift on stock suspension

I want LT myself LOL I hate torsion bars!

last years baja 500 prerun






might be a few pics/vids from last weekend in ocotillo floating around...

[QUOTE=410fortune;1362288]There is a thread about the Mcneils wreck in Baja


linkkkkkk? thanks

where is this thing?

i am having a helluva time finding a 2wd sport trac with semi-low mileage for a decent price. As soon as I find one the thing sells. I found an 03 with 105,000 miles for 5,000 and someone put a deposit on it over the phone before I got there.

you planning on building it when you get one

if anyones looking to buy a sport trac my buddy has one 4wd with around 20k on it.. i believe 4-6inch superlift on it with nice rims and bfg tires.. its like a blue green color and very clean.. pm me if interested..

Originally Posted by COR 250

you planning on building it when you get one

yeah eventually. seems like theyre arent to many out there to begin with, and when they come up for sale people jump on them.

Originally Posted by jeepspeed93

yeah eventually. seems like theyre arent to many out there to begin with, and when they come up for sale people jump on them.

wajjjjjj, shoulda been there sooner man ahahaha

some inspiration



volcano domination

is that your DD?

Originally Posted by COR 250

is that your DD?

It takes care of about 80% of my driving duties.

Originally Posted by garagebuilder

some inspiration



volcano domination

i seen this thing about a month ago on the 215 super nice near barton road.

Originally Posted by garagebuilder

It takes care of about 80% of my driving duties.

haha yeahh i see your truck everywhere. Barstow, Primm, Lucerne, morongo haha. One of my favorite trucks out there.

What glass company's are making 1 pieces for the front ends?
What options are there for rear glass?
Can I run a 15'' rim on an 05 ST? Or the breaks to big?
Does Giant offer the springs and shackles for the 64's to the public?

edit: Can you fit 4 seats in a ST once its caged if the front 2 seats are set up for someone 6'1+?

I love these 2 pics of Mexi's ST:



Here's one in Lake Forest that I see all the time:

Originally Posted by aiiraciing

What glass company's are making 1 pieces for the front ends?
What options are there for rear glass?
Can I run a 15'' rim on an 05 ST? Or the breaks to big?
Who's Sports Trac is this?

That would be Mexi Mike's Sport Trac
Yes you can run 15's wheels as Mexi is doing so in that pic.
Sorry I don't know any other details.

Mike

his screen name is garagebuilder, he's quoted a few posts above yours, and has posted in here before too.

-Yes you can run 15" wheels with it.

- GIANT does / will offer a 64" kit for the Sport Trac. Mexi sorta did the prototyping for hte kit and it works out awesome. You can use a STOCK older extended cab 2 piece drivetrain from the 90's trucks and it basically bolts right in.

- Mexi is running a combo of Hanneman and Glassworks fiberglass on the truck, not sure which is which.

- 1st 2 sport trac photos is mexi's. The other sport trac is / or was VANO from Cameron Steele's DA crew.

Originally Posted by 1450ranger

The other sport trac is / or was VANO from Cameron Steele's DA crew.

Which was my old ST. Here are some pics of the work I did to it.











Front was stock. Not sure whats on there now....but I do miss it.

Was at Mexi's earlier, both glass is Hanneman. There is alot of ugly glass out there or ST's, beware.

went diggin found the only pic of my truck movin out to club 4-0

i have a pic of you at this years BAP ill try and dig up tomorow

the giant 64" kit goes on basicly like a toyota, gotta have a wider axle and the mounts get welded on. the bitchin part is the driveshaft, i used a square body extended cab d shaft. it's a 2 piece. the sport tracs have the same gas tank crossmember that the rangers have. if i would have kept the stock 1 piece d shaft it but would have hit the x member. the ranger 2 pc. d shaft's carrier bearing is located exactly where the stock gas tank x member is, so you just gotta tab it, the slip yoke also works with no mods, and the length is perfect also. and since the kit was first designed to run on rangers the plung is near to nothing.

Originally Posted by hondarider23

i have a pic of you at this years BAP ill try and dig up tomorow

sick, shits elusive very few pics

Front was stock. Not sure whats on there now....but I do miss it.[/QUOTE]

I believe it is for sale right now on race-dezert but I could be wrong. I think this is it

http://www.race-dezert.com/cgi-bin/t...econd&id=15053

Originally Posted by garagebuilder

sick, shits elusive very few pics

Yet every race/event I go to I look out into the horizon and see the elusive ESTOD cruising by.

Mike

Originally Posted by only1mikey

Yet every race/event I go to I look out into the horizon and see the elusive ESTOD cruising by.

Mike

Explorer Sport Trac Of Death?

Originally Posted by desert_silverado

explorer sport trac of death?

10 4

sorry i took forever

So which one actually owns a ST, I need to interegate you... I gotsz to ask you or yall some ???'s about what to do with one of these beast.

Did you even read the fucking thread?

hey mexi... were u rollin down main st. in corona last night? (saturday)... buddy mark and i could have sword we saw you rollin in the sportrac.

Originally Posted by hondarider23

sorry i took forever

Screw the ST.. Specs on that ranger!!

Originally Posted by oorracing

Screw the ST.. Specs on that ranger!!

That's Chris's of C&D ranger, he's the guy pissin on his passenger door.
The only thing I know about his truck is it's mid engine, twin turbo and has a sterling 10" rear end.

So edge long travel arms will bolt up on a ST? no problems? Ive been looking at the Dixon bros kit and its a good deal I guess but im still debating whether or not I should just fucking make my own.

Could a clip from say an 03 edge be fitted on there and look right? The built ones look bad ass but stock they are soooo gay.