Titan Offroad's "New" Truck

[TMorf]

Finally got cranking on the truck tonight after cutting it up the week after the 1000.

We did ALL of this today. Everything is 1 3/4 or 1 1/2 .120 wall 4130 and 4130 plate.

Tires, rims and rear end are just for mock up. Were going to run Kumho 35s or 37s on the new American Racing 17" Chamber beadlocks.

Camburg built the front end and is supplying the 3 link kit connected to a Currie 9 inch. Im sure Jerry etc. will chime in with more details and exact specs. Been a long night so heres some pictures.

More details about the truck will come soon.

[TMorf]

[TMorf]

[TMorf]

[balls to the wall]

Is there still a Titan under there or is that a fronty cant tell from the pics. Looks bad ass though you guys work dam fast.

[TMorf]

And I said a few, ha!

[TMorf]

It is / was the old Stock Full.

[EseLoco]

what class will you be racing the titan when you are done with this class 8?

[dezertMXrider]

We plan to race Class 8 in the 500 and the Baja Mil and then 1400 in whatever MDR races we can in between. Oh, and were shooting to have it race ready for the 500. Baja or Bust!

Justin

[motoxscott]

Looking good! Tell Bob to come by and pick up his lower links and hubs ... haha

- Scott

[shrtcrse]

where did you get the spare tire ratchet straps at

[SMnissan]

what ever happened to Bob using NCD's kit on his other truck?

[TMorf]

Originally Posted by [b

Quote[/b] (shrtcrse @ April 20 2007,7:43)]where did you get the spare tire ratchet straps at

We made them from our old straps that were three points for flat spares.

[TMorf]

Originally Posted by [b

Quote[/b] (SMnissan @ April 20 2007,1:09)]what ever happened to Bob using NCD's kit on his other truck?

This is the truck that the NCD front end was going on. We dont have another truck, right now anyways.

Basically we had a fresh prep and broke a spindle testing, thats all the 1000 was for us last year. So NCD and cutting the bed seemed like the way to go so that we could hit up the MORE race two weeks after and have fun. There were a number of factors that led to the decision, but chose to wait instead.

[OC96Ranger]

Not only is that thing bad ass, but you took some great pictures of it (and a good amount of pictures too). Awesome job.
-dave

[Desert Mangler]

noice! that work looks killer. good job

[nauta87]

so what the fuck are you guys gonna do about the fuel cell? hahahahhaha

[longtravelyota]

damn that truck looks good....hope to see it down at the 500

[Prerun4run]

Dayum, looks like its turning out to be a killer build! Congrats, I have always wanted to see one of these Titans out there in the Desert tearing it up! I would run 37's as I believe all class 8's do, or at least the competitive ones. One last question, why such a small fuel cell? I would imagine you guys should be running in the 60+ gallon range...

[dezertMXrider]

Originally Posted by [b

Quote[/b] (Prerun4run @ April 22 2007,2:23)]Dayum, looks like its turning out to be a killer build! Congrats, I have always wanted to see one of these Titans out there in the Desert tearing it up! I would run 37's as I believe all class 8's do, or at least the competitive ones. One last question, why such a small fuel cell? I would imagine you guys should be running in the 60+ gallon range...

First, this Titan has been ripping up the desert for the past 2 years in Stock Full. We will run 35s for now, but will most likely run 37s in the future. The cell is 44 gallons and the only reason we are using it is because we already had it. We were gonna have a custom cell made but it is just way too much money. it will be Class 8 legal and we will just get a rear start and go for it, but it will mainly be a 1400 truck. Thanks for the positive thoughts.

Justin

[TMorf]

Originally Posted by [b

Quote[/b] (Prerun4run @ April 22 2007,2:23)]Dayum, looks like its turning out to be a killer build! Congrats, I have always wanted to see one of these Titans out there in the Desert tearing it up! I would run 37's as I believe all class 8's do, or at least the competitive ones. One last question, why such a small fuel cell? I would imagine you guys should be running in the 60+ gallon range...

Ditto on the 37s.

Cell was at an unbeatable price. Its a 40 or 44, cant remember, either way we should get about 120 to 130 miles each tank which will work.

[Prerun4run]

oh it looked like a 32 gallon cell, didnt know....

[jeepspeed93]

oh sooo sickkkkkk!

[TMorf]

Originally Posted by [b

Quote[/b] (jeepspeed93 @ April 23 2007,6:53)]oh sooo sickkkkkk!

Sicker than your JeepSpeed!

[Bryan_D]

Originally Posted by [b

Quote[/b] (TMorf @ April 23 2007,10:28)]

Sicker than your JeepSpeed! *

Hey hey hey just because his name is js doenst mean you need to bag on them...... Geeez

[TMorf]

Originally Posted by [b

Quote[/b] (Bryan_D @ April 24 2007,4:07)]

Hey hey hey just because his name is js doenst mean you need to bag on them...... Geeez

Haha hes a buddy of ours. Mucho respect for the JS guys after we romped Barstow with him at midnight.

[TMorf]

Updates!

Dual battery box with max dimple dies. Cut the back of the cab to clearance the cell which fits snug with about 1/4 inch on either side. Fully plated the frame on both sides and got more triangulation done. Pic is blurry but the links are just as sexy as Scott’s! Tool boxes originally went behind both front seats, but were going to put them between both spares. That area will be boxed and they’re going be mounted inside, another tight fit. The lid will flip up and have the jack mounted on top.

[jeepspeed93]

gnarnia

[TMorf]

More updates.

Firewall bead rolled and almost there. Cheese grater dual battery box. Cell and coolers mounted. Tool box/contingency beer cooler nearly done. More tubes. Pic of our paddle shifter that works with the gate shifter on the 5 speed.

[TMorf]

Were going to box in the rear section so all air from the cab will go through the coolers.

Our rear view mirror is going to be a rear facing camera with a 150 degree view thats gonna display on a 5 or 6 inch screen on the dash.

[4130]

Nice build that's gonna be one crazy Titan

[KevinCase]

Paddle shifter!!!... gotta see this shit when its done... very cool... anyone else run a paddle shifter??? would definitly think it would be a great help out there!

[TMorf]

Paddle shifter has been on for a few months. Works awesome. We have the gate shifter too, so just depends on what the driver wants to use.

[TMorf]

New updates.

Just started mocking up the 4 link system, no more 3 link. 2.5 coilover and 3.0 triple bypasses from SAW. More paneling done than shown in the pictures including beadrolling every panel, but still a lot to go. Got the Currie 9 inch today. Going to mount the brake light LEDs in the glass, ambers between the tires in the panels.

Going to be some long nights trying to make the 500.

[FuggiNJimmiE75]

Awesome work very clean!!!

[jeepspeed93]

oooooohhhh shes comin along!!
shred the gnarrr
cant wait

[sdfender1sd]

thats sweet! thats the first linked titan i've seen so far.

[TMorf]

Havent made much progress.

Got the rear CNCs mounted and finally got the pinion angle correct for the three link (3 to 4 and finally back to 3 ha). Other than that the firewall is pretty much done.

[SICKNICKSFAB.COM]

THANKS TO BOB AT TITAN, THOSE TIRES I GOT FROM YOU KICK FUCKIN ASS

[I Love Tacos]

thats sofakingradical