Thread: General Grabber Red Letter??

Does anyone happen to know the actual height of a 33x12.5x15 and a 35x12.5x15? I know a few other companies tires say 33" but actually measure 32" and the 35" is a 33.6.

Is this the same for the GG or these the actual size? Right now i have a 305/70/16 (32.8) and im just trying to see which tire would work better with my setup.

Thanks

The true size is 33" measuring the height from edge of sidewall to edge of sidewall isnt going to give you an accurate measurment.

Yea i red somewhere you must measure from sidewall to center and multiply by 2, i was checking this website Tire size calculator and that is where i am getting my measurements from but i have also done some research and a few other people measure their 35's and they measure from a 33" to 34.5 depending on air pressure and brand.

when my 35" grabbers were new they were still bigger than my 315(34.5")baja claws and the grabbers towered above my 35" projects

Nice, thank you!

Originally Posted by cache96

Nice, thank you!

no prob and that was around 38psi, imo a real 35" tire

Measure around tire with string total length of string divided by pi (3.14) and there ya go

Originally Posted by blklvl2

Measure around tire with string total length of string divided by pi (3.14) and there ya go

this was the formula i was looking for...

haha diameter = Circumference divided by pi (3.14) use a tape measure like dirt track guys use to measure stagger for sprint cars and such.